VF-987 Linux UHF RFID Fixed Reader
Shell adopt high strength aluminum CNC, rugged and artistic, PCB is high density 6 layer board design, good for working under harsh environment for long period.
Adopt Impinj E710/indy R2000 chip, with high-performance multi-tag identification algorithms.
InventoryPower patrolPersonnel LivestockAccessoriesClothing retail
Frequency range | 860Mhz – 960Mhz(Can be adjusted according to different countries or regions) |
Supported regions | US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Taiwan |
Frequency modulation | FHSS or fixed-frequency, can be set by software |
RF output | +20.0 to +30 dBm; 50 ohm load. |
Peak inventory speed | > 700 tags/sec |
Tag Buffer Size | 800 tags @ 96 bit EPC |
Tag RSSI | Supported |
Antenna Detector | Supported |
Ambient Temp Monitor | Supported |
The number of antennas | 8 SMA Antenna inteface |
Communication interface | RS232, RS485, TCP/IP interface |
Communication rate | Serial rate 9600~115200bps, RJ45 is 10Mbps,wiegand26/34 |
Communication interface option | Wiegand34, 26, CAN,WIFI, Bluetooth, 4G |
Secure firmware upgrade | The upgrade mechanism can be extended |
input / output (GPIO) | 4 inputs, 4 output |
CPU processor | Adopt ATMEL AT91SAM9260 CPU, ARM926EJ-S processor; |
Storage unit |
|
Support operating system | Linux2.6.30 |
Reading distance | 9dbi Antenna configuration, typical read range: 15 to 25 m (depends on tag) |
Protocol | EPC global UHF Class 1 Gen 2 / ISO 18000-6C/ ISO18000-6B |
Maximum receiver sensitivity | -82 dBm; Maximum return loss: 10 DBm |
RF chip | Impinj INDY R2000 chip |
Air protocol |
|
Operating frequency | 902-928MHz or 865-868MHz |
RF output power | 20~30dBm±1dBm |
Output power adjustable | 1dBm step in(set by VANCH demo software) |
Receive sensitivity | <﹣85dBm |
Tag detect peak speed | >800 times/s |
Read range | 0-25m(related to reader parameter setting, antenna gain, tag performance) |
Write range | 0-10m(related to reader’s parameter setting, antenna gain, tag performance) |
Tag RSSI | Support |
Antenna connect protection | Support |
Support area | America、Canada and other areas conform to FCC Part 15 Europe and other areas conform to ETSI EN 302 308 China、India、Japan、Korea、Malaysia、Taiwan |
Dimension | 205(L) * 101 (W) * 34 (H) mm |
RF Connector |
|
Power | With 220V AC input, the output of +12 V/3A DC power converter |
Weight | 1.5KG |
IP rating | IEC IP53 |
Operating Temp. | -20 oC to +60 oC |
Storage Temp. | -20°C to +85°C |
Certification | FCC, CE |
Operating Temp. | ﹣20°~﹢85° |
Humidity | <95%(non-condensing) |
*Choose a product